Customization: | Available |
---|---|
Type: | Electronic Building Block |
Gender: | Unisex |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
All products in our store Ex-factory price not free shipping
For more information, please contact online customer service or email me. Thefirsttool is a parts library specially built for individuals and teams such as robot competitions and robot enthusiasts. It is compatible with gobilda/Tetrix/REV/FTC/FRC and other competitions, and can meet the daily creative construction needs.
Item No | name | Specification | Picture/Size |
A5206-0002-0002 | 5206 Series Servo Gearbox for large Size Servos( 2:1 Ratio,no servo) | This Servo Gearbox is driven by large Size Servos for example Hitec HS-788HB, titanium geared servo. The all aluminum framework acts as a servo mount, an exoskeleton and a pillow block all in one.This gearbox introduces a 2:1 external gear ratio in order to lessen the range while increasing the torque and precision two-fold. If this ratio doesn't suit your needs, be sure to check out the other Servo Gearbox options. Having the servo mounted in the gearbox also isolates the load to a huge 32mm output hollow tube that is supported in a pair of bearings to protect the servo from any radial or axial loads.The large center bore is a portal that can be used to run cables, wiring, shafting etc. through so that they don't tangle or limit the rotation of the final gear.The gearbox opens up a world of mounting possibilities given the M4 threaded holes on each side which are on grid pattern for compatibility throughout the thefirsttool system. The hub on the top of the gearbox provides threaded holes to fasten to, but you can also opt to fasten straight to the aluminum output gear using M4 hardware and standoffs or spacers. Gear Ratio 2:1 The kit comes with all the necessary pieces, minus the Servos |
|
A5206-0002-0003 | 5206 Series Servo Gearbox for large Size Servos( 3:1 Ratio,no servo) | This Servo Gearbox is driven by large Size Servos for example Hitec HS-788HB, titanium geared servo. The all aluminum framework acts as a servo mount, an exoskeleton and a pillow block all in one.This gearbox introduces a 3:1 external gear ratio in order to lessen the range while increasing the torque and precision three-fold. If this ratio doesn't suit your needs, be sure to check out the other Servo Gearbox options. Having the servo mounted in the gearbox also isolates the load to a huge 32mm output hollow tube that is supported in a pair of bearings to protect the servo from any radial or axial loads.The large center bore is a portal that can be used to run cables, wiring, shafting etc. through so that they don't tangle or limit the rotation of the final gear.The gearbox opens up a world of mounting possibilities given the M4 threaded holes on each side which are on grid pattern for compatibility throughout the thefirsttool system. The hub on the top of the gearbox provides threaded holes to fasten to, but you can also opt to fasten straight to the aluminum output gear using M4 hardware and standoffs or spacers. Gear Ratio 3:1 The kit comes with all the necessary pieces, minus the Servos |
|
A5206-0002-0004 | 5206 Series Servo Gearbox for large Size Servos( 4:1 Ratio,no servo) | This Servo Gearbox is driven by large Size Servos for example Hitec HS-788HB, titanium geared servo. The all aluminum framework acts as a servo mount, an exoskeleton and a pillow block all in one.This gearbox introduces a 4:1 external gear ratio in order to lessen the range while increasing the torque and precision four-fold. If this ratio doesn't suit your needs, be sure to check out the other Servo Gearbox options. Having the servo mounted in the gearbox also isolates the load to a huge 32mm output hollow tube that is supported in a pair of bearings to protect the servo from any radial or axial loads.The large center bore is a portal that can be used to run cables, wiring, shafting etc. through so that they don't tangle or limit the rotation of the final gear.The gearbox opens up a world of mounting possibilities given the M4 threaded holes on each side which are on grid pattern for compatibility throughout the thefirsttool system. The hub on the top of the gearbox provides threaded holes to fasten to, but you can also opt to fasten straight to the aluminum output gear using M4 hardware and standoffs or spacers. Gear Ratio 4:1 The kit comes with all the necessary pieces, minus the Servos |
|
A5206-0002-0005 | 5206 Series Servo Gearbox for large Size Servos( 5:1 Ratio,no servo) | This Servo Gearbox is driven by large Size Servos for example Hitec HS-788HB, titanium geared servo. The all aluminum framework acts as a servo mount, an exoskeleton and a pillow block all in one.This gearbox introduces a 5:1 external gear ratio in order to lessen the range while increasing the torque and precision five-fold. If this ratio doesn't suit your needs, be sure to check out the other Servo Gearbox options. Having the servo mounted in the gearbox also isolates the load to a huge 32mm output hollow tube that is supported in a pair of bearings to protect the servo from any radial or axial loads.The large center bore is a portal that can be used to run cables, wiring, shafting etc. through so that they don't tangle or limit the rotation of the final gear.The gearbox opens up a world of mounting possibilities given the M4 threaded holes on each side which are on grid pattern for compatibility throughout the thefirsttool system. The hub on the top of the gearbox provides threaded holes to fasten to, but you can also opt to fasten straight to the aluminum output gear using M4 hardware and standoffs or spacers. Gear Ratio 5:1 The kit comes with all the necessary pieces, minus the Servos |
|
A5206-0002-0007 | 5206 Series Servo Gearbox for large Size Servos( 7:1 Ratio,no servo) | This Servo Gearbox is driven by large Size Servos for example Hitec HS-788HB, titanium geared servo. The all aluminum framework acts as a servo mount, an exoskeleton and a pillow block all in one.This gearbox introduces a 7:1 external gear ratio in order to lessen the range while increasing the torque and precision seven-fold. If this ratio doesn't suit your needs, be sure to check out the other Servo Gearbox options. Having the servo mounted in the gearbox also isolates the load to a huge 32mm output hollow tube that is supported in a pair of bearings to protect the servo from any radial or axial loads.The large center bore is a portal that can be used to run cables, wiring, shafting etc. through so that they don't tangle or limit the rotation of the final gear.The gearbox opens up a world of mounting possibilities given the M4 threaded holes on each side which are on grid pattern for compatibility throughout the thefirsttool system. The hub on the top of the gearbox provides threaded holes to fasten to, but you can also opt to fasten straight to the aluminum output gear using M4 hardware and standoffs or spacers. Gear Ratio 7:1 The kit comes with all the necessary pieces, minus the Servos |
|
A5206-0002-0009 | 5206 Series Servo Gearbox for large Size Servos( 9:1 Ratio,no servo) | This Servo Gearbox is driven by large Size Servos for example Hitec HS-788HB, titanium geared servo. The all aluminum framework acts as a servo mount, an exoskeleton and a pillow block all in one.This gearbox introduces a 9:1 external gear ratio in order to lessen the range while increasing the torque and precision nine-fold. If this ratio doesn't suit your needs, be sure to check out the other Servo Gearbox options. Having the servo mounted in the gearbox also isolates the load to a huge 32mm output hollow tube that is supported in a pair of bearings to protect the servo from any radial or axial loads.The large center bore is a portal that can be used to run cables, wiring, shafting etc. through so that they don't tangle or limit the rotation of the final gear.The gearbox opens up a world of mounting possibilities given the M4 threaded holes on each side which are on grid pattern for compatibility throughout the thefirsttool system. The hub on the top of the gearbox provides threaded holes to fasten to, but you can also opt to fasten straight to the aluminum output gear using M4 hardware and standoffs or spacers. Gear Ratio 9:1 The kit comes with all the necessary pieces, minus the Servos |