| Customization: | Available |
|---|---|
| Type: | Electronic Building Block |
| Gender: | Unisex |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
All products in our store Ex-factory price not free shipping
For more information, please contact online customer service or email me. Thefirsttool is a parts library specially built for individuals and teams such as robot competitions and robot enthusiasts. It is compatible with gobilda/Tetrix/REV/FTC/FRC and other competitions, and can meet the daily creative construction needs.
| Item No | name | Specification | Picture | Size |
| 3201-0043-0002 | 3201 Series Quad Block Pattern Mount (43-2) | Quad Block Pattern Mounts are 43mm wide, allowing them to span between the two sides of Channel and provide holes on multiple surfaces to fasten additional components to.This is arguably the most versatile mount when building with channel. It's threaded from the front, back and sides so it can be installed and used a number of different ways. Weight 45g Each Material Aluminum Finish Clear Anodized Quantity: pkg of 1 |
 |
|
| 3201-0043-0005 | 3201 Series Quad Block Pattern Mount (43-5) | Possessing extreme versatility in channel-based builds, this 3201 Series Quad Block Pattern Mount is threaded from the front, back and sides for use in nearly unlimited ways! Where the popular 3201-0043-0002 is 43mm and symmetric, the asymmetric design of the 3201-0043-0005 leaves its top edge flush with the open edge of the channel. The 16mm pattern in the mount's center has all thru-holes so that the part can easily fasten to the side of zhouyu® goRAIL and other extrusion-based structures. SPECS Weight 66g Material Aluminum Finish Clear Anodized |
|
|
| 3201-0027-0001 | 3201 Series Quad Block Pattern Mount (27-1) | Quad Block Pattern Mounts are 43mm wide, allowing them to span between the two sides of Channel and provide holes on multiple surfaces to fasten additional components to.Consider this to be a Quad Block Pattern Mount for Low-Side U-Channel. While the go-to 1201-0043-0002 is perfectly compatible with 1121 Series Low-Side U-Channel, sometimes a slightly narrower 'boxed' design lends itself well for builds that have width regulations. This 27mm wide Quad Block Pattern Mount will provide 27mm between two pieces of Low-Side U-Channel, leaving the outside to outside dimension 32mm to stay on-pattern. Weight 11g Material Aluminum Finish Clear Anodized |
|
|
| 3201-0043-0003 | 3201 Series Quad Block Pattern Mount (43-3) | Quad Block Pattern Mounts are 43mm wide, allowing them to span between the two sides of Channel and provide holes on multiple surfaces to fasten additional components to.This is arguably the most versatile mount when building with channel. It's threaded from the front, back and sides so it can be installed and used a number of different ways.This Quad Block Pattern Mount is similar in function to the 1201-0043-0002, but with a condensed mounting pattern. The three holes on each side align with the 8mm grid pattern so that it's compatible with pattern-based and grid-based parts alike. There are cases, such as in a worm gearbox, where the condensed pattern provides that extra bit of clearance you need to complete your assembly. Weight 42g Each Material Aluminum Finish Clear Anodized Quantity: pkg of 1 |
|
|
| 3201-0043-0004 | 3201 Series Quad Block Pattern Mount (43-4) | This 3201 Series Quad Block Pattern Mount (43-4) have two 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern and are 43mm wide, allowing them to span between the two sides of Channel and provide holes on multiple surfaces to fasten additional components to.The clean slate will allow other parts (such as a ball bearing or a thrust bearing) to rest against that surface. As an added bonus, the backside of the 14mm center hole has been counterbored to be able to capture the flange of a bearing. there are many ways to build an actuator using 3201 Series Quad Block Pattern Mount (43-4), such as The 3201-0043-0004 Quad Block Pattern Mount can be used to create a 1:1gear train within channel and can be used to create a worm gear assembly . Weight 75g Each size:67mm*43mm*12mm Material Aluminum Finish Clear Anodized Quantity: pkg of 1 |
|
|
| 3201-0024-0001 | 3201 Series Quad Block Pattern Mount (24-1) | Create a 90 degree junction between two pieces of goRUN using a surface mount. The offset profile allows the heads of the screws holding the mount to the goRUN to remain below the mating surface, leaving a clean slate to fasten to.This compact surface mount allows you to create a 90 degree joint between two pieces of goRUN while providing access to the center hole of the goRUN for routing wires or running shafting through. SPECS Weight 14g Material Aluminum Finish Clear Anodized |
|
|
){kind=link}