| Customization: | Available |
|---|---|
| Age: | ＞ 8 Years |
| Certification: | Assemble |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 4305-0025-0012 | 4305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 12 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 12 tooth servo gear is most commonly used to drive the 108 tooth hub gear, spaced 48mm away, in order to create a massive 9:1 ratio. For a more compact setup, it will also mate with a 48 tooth hub gear, spaced 24mm away to create a 4:1 ratio. Weight 2.2g Material Brass Tooth Count 12 25 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0025-0015 | 4305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 15 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 15 tooth servo gear is most commonly used to drive the 105 tooth hub gear, spaced 48mm away, in order to create a 7:1 ratio. This gear reduction will increase the torque at the hub gear to 7x what the servo produces. The sacrifice will be the reduction in range of motion and speed by the ratio. Weight 4.1g Material Brass Tooth Count 15 25 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0025-0020 | 4305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 20 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 20 tooth servo gear is most commonly used to drive the 100 tooth hub gear, spaced 48mm away, in order to create a 5:1 ratio. This gear reduction will increase the torque at the hub gear to 5x what the servo produces. The sacrifice will be the reduction in range of motion and speed by the ratio. Weight 6.1g Material Brass Tooth Count 20 25 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0025-0024 | 4305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 24 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 24 tooth servo gear is most commonly used to drive the 96 tooth hub gear, spaced 48mm away, in order to create a 4:1 ratio. This gear reduction will increase the torque at the hub gear to 4x what the servo produces. The sacrifice will be the reduction in range of motion and speed by the ratio. Weight 8.1g Material Brass Tooth Count 24 25 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0025-0030 | 4305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 30 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 30 tooth servo gear is most commonly used to drive the 90 tooth hub gear, spaced 48mm away, in order to create a 3:1 ratio. This gear reduction will increase the torque at the hub gear to 3x what the servo produces. This gear may also be used to drive a 30 tooth pinion gear spaced 24mm away for a 1:1 ratio. Weight 11g Material Brass Tooth Count 30 25 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0025-0040 | 4305 Series Brass, MOD 0.8, Servo Gear (25 Tooth Spline, 40 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 40 tooth servo gear is most commonly used to drive the 80 tooth hub gear, spaced 48mm away, in order to create a 2:1 ratio. This gear reduction will increase the torque at the hub gear to 2x what the servo produces. This gear may also be used to drive a 20 tooth pinion gear spaced 24mm away for a 2:1 overdrive if you're set out to increase the rotation of the servo. Weight 18g Material Brass Tooth Count 40 25 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0024-0012 | 4305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 12 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 12 tooth servo gear is most commonly used to drive the 108 tooth hub gear, spaced 48mm away, in order to create a massive 9:1 ratio. For a more compact setup, it will also mate with a 48 tooth hub gear, spaced 24mm away to create a 4:1 ratio. Weight 2.2g Material Brass Tooth Count 12 24 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0024-0015 | 4305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 15 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 15 tooth servo gear is most commonly used to drive the 105 tooth hub gear, spaced 48mm away, in order to create a 7:1 ratio. This gear reduction will increase the torque at the hub gear to 7x what the servo produces. The sacrifice will be the reduction in range of motion and speed by the ratio. Weight 4.1g Material Brass Tooth Count 15 24 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0024-0020 | 4305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 20 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 20 tooth servo gear is most commonly used to drive the 100 tooth hub gear, spaced 48mm away, in order to create a 5:1 ratio. This gear reduction will increase the torque at the hub gear to 5x what the servo produces. The sacrifice will be the reduction in range of motion and speed by the ratio. Weight 6.1g Material Brass Tooth Count 20 24 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0024-0024 | 4305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 24 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 24 tooth servo gear is most commonly used to drive the 96 tooth hub gear, spaced 48mm away, in order to create a 4:1 ratio. This gear reduction will increase the torque at the hub gear to 4x what the servo produces. The sacrifice will be the reduction in range of motion and speed by the ratio. Weight 8.1g Material Brass Tooth Count 24 24 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0024-0030 | 4305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 30 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 30 tooth servo gear is most commonly used to drive the 90 tooth hub gear, spaced 48mm away, in order to create a 3:1 ratio. This gear reduction will increase the torque at the hub gear to 3x what the servo produces. This gear may also be used to drive a 30 tooth pinion gear spaced 24mm away for a 1:1 ratio. Weight 11g Material Brass Tooth Count 30 24 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
| 4305-0024-0040 | 4305 Series Brass, MOD 0.8, Servo Gear (24 Tooth Spline, 40 Tooth) | Transfer the torque of your servo into a gear train with these MOD 0.8 servo gears. This 40 tooth servo gear is most commonly used to drive the 80 tooth hub gear, spaced 48mm away, in order to create a 2:1 ratio. This gear reduction will increase the torque at the hub gear to 2x what the servo produces. This gear may also be used to drive a 20 tooth pinion gear spaced 24mm away for a 2:1 overdrive if you're set out to increase the rotation of the servo. Weight 18g Material Brass Tooth Count 40 24 Tooth Spline Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
Shenzhen Zhouyu Intelligent Technology Co.,Ltd , founded in 2007 and Dongguan Zhouyu Intelligent Technology Co.,Ltd, founded in 2015, is a leading STEAM education solution provider.We are the largest manufacturer of Educational mini machines and Educational metal robot in China. the Educational metal robot can use for the FTC
Targeting the STEAM education and entertainment markets for schools, educational institutions and families, thefirsttool provides the most complete hardware, software, content solutions, and a top-notch robotics competitions, with the aim of achieving deep integration of technology and education.
I would like to inquire about potentially business partnership with your company.
Please forward this information to the appropriate personnel so that we can discuss the project.
Important !!!
-Please do not send any payment before confirming the bank information with our CEO Mr. James Long
){kind=link}