| Customization: | Available |
|---|---|
| Age: | ＞ 8 Years |
| Certification: | Assemble |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 3908-0025-0032 | 3908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) | The 3908 Series Servo Hub is 32mm in diameter and 6mm thick so that you can support it with a bearing or clamp around it using a 32mm ID clamping mount. It contains both threaded and thru-holes on the 16mm pattern so that you can fasten almost any thefirsttool® component to the top. The counterbored top will recess the servo screw down below the surface to keep from interfering with mating parts. Weight 8.2g Material Aluminum Finish Clear Anodized 25 Tooth Spline Quantity: pkg of 1 |
| 3908-0024-0032 | 3908 Series Servo Hub (24 Tooth Spline, 32mm Diameter) | The 3908 Series Servo Hub is 32mm in diameter and 6mm thick so that you can support it with a bearing or clamp around it using a 32mm ID clamping mount. It contains both threaded and thru-holes on the 16mm pattern so that you can fasten almost any thefirsttool® component to the top. The counterbored top will recess the servo screw down below the surface to keep from interfering with mating parts. Weight 8.2g Material Aluminum Finish Clear Anodized 24 Tooth Spline Quantity: pkg of 1 |
| 3910-0025-1033 | 3910 Series Servo Hub Shaft (25 Tooth Spline, 10mm Shaft Diameter, 33mm Length) | Servo shafts pair well with bearings to isolate radial loads. Some shafts have attachment options built in, while others require the use of a clamping part. This provides freedom for adjusting height and orientation.The hub shaft is an integral part of a ServoBlock. The long neck allows it to be supported with a 10mm pillow block for heavy duty applications. The 32mm OD top is able to work with 32mm clamps as well as 32mm bearings. The pattern contains both thru-holes and tapped holes to be compatible with almost any thefirsttool part. Length 33mm Weight 12g Material Aluminum Tooth:25 Tooth Spline Quantity: pkg of 1 Finish Clear Anodized |
| 3911-0025-1036 | 3911 Series Servo Shaft (25 Tooth Spline, 10mm Shaft Diameter, 36mm Length) | Servo shafts pair well with bearings to isolate radial loads. Some shafts have attachment options built in, while others require the use of a clamping part. This provides freedom for adjusting height and orientation.Attaching a round shaft to a servo spline unlocks many possibilities. The shaft is able to slide through a 10mm bearing so that it can be used in applications that would otherwise exert a heavy radial load on the servo. In order to fasten components to the shaft, use a 10mm clamping hub which provides the ability to adjust the height as well as clock the mating part with ease. Length 36mm Weight 4.3g Material Aluminum Tooth:25 Tooth Spline Quantity: pkg of 1 Finish Clear Anodized |
| 3910-0024-1033 | 3910 Series Servo Hub Shaft (24 Tooth Spline, 10mm Shaft Diameter, 33mm Length) | Servo shafts pair well with bearings to isolate radial loads. Some shafts have attachment options built in, while others require the use of a clamping part. This provides freedom for adjusting height and orientation.The hub shaft is an integral part of a ServoBlock. The long neck allows it to be supported with a 10mm pillow block for heavy duty applications. The 32mm OD top is able to work with 32mm clamps as well as 32mm bearings. The pattern contains both thru-holes and tapped holes to be compatible with almost any thefirsttool part. Length 33mm Weight 12g Material Aluminum Tooth:24 Tooth Spline Quantity: pkg of 1 Finish Clear Anodized |
| 3911-0024-1036 | 3911 Series Servo Shaft (24 Tooth Spline, 10mm Shaft Diameter, 36mm Length) | Servo shafts pair well with bearings to isolate radial loads. Some shafts have attachment options built in, while others require the use of a clamping part. This provides freedom for adjusting height and orientation.Attaching a round shaft to a servo spline unlocks many possibilities. The shaft is able to slide through a 10mm bearing so that it can be used in applications that would otherwise exert a heavy radial load on the servo. In order to fasten components to the shaft, use a 10mm clamping hub which provides the ability to adjust the height as well as clock the mating part with ease. Length 36mm Weight 4.3g Material Aluminum Tooth:24 Tooth Spline Quantity: pkg of 1 Finish Clear Anodized |
Shenzhen Zhouyu Intelligent Technology Co.,Ltd , founded in 2007 and Dongguan Zhouyu Intelligent Technology Co.,Ltd, founded in 2015, is a leading STEAM education solution provider.We are the largest manufacturer of Educational mini machines and Educational metal robot in China. the Educational metal robot can use for the FTC
Targeting the STEAM education and entertainment markets for schools, educational institutions and families, thefirsttool provides the most complete hardware, software, content solutions, and a top-notch robotics competitions, with the aim of achieving deep integration of technology and education.
I would like to inquire about potentially business partnership with your company.
Please forward this information to the appropriate personnel so that we can discuss the project.
Important !!!
-Please do not send any payment before confirming the bank information with our CEO Mr. James Long
){kind=link}