Customization: | Available |
---|---|
After-sales Service: | 1 Year |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Item No | name | Specification |
4302-0014-0048 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 48 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 48 tooth, MOD 0.8 gear is the smallest hub gear we offer. While it is able to mate with any MOD 0.8 gear, it's most common partner is a 12 tooth servo gear. This combo would create a 4:1 underdrive ratio increasing the torque and decreasing the speed of the servo. Center-to-center spacing would be 24mm. Weight 9.4g Material Aluminum Finish Clear Anodized Tooth Count 48 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0060 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 60 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 60 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is another 60 tooth gear to create a 1:1 ratio. A 1:1 ratio is useful when you have an assembly where you want two pieces to move at the same time, but in opposite directions. A good example of this would be a gripper. Weight 14g Material Aluminum Finish Clear Anodized Tooth Count 60 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0080 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 80 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 80 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 40 tooth Servo Gear. The combo creates a 2:1 underdrive, slowing the final speed while increasing the torque twofold. Weight 25g Material Aluminum Finish Clear Anodized Tooth Count 80 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0090 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 90 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 90 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 30 tooth pinion gear or servo gear. Using the pinion gear you can create 3:1 underdrive or overdrive setup depending on your application. When used with the 30 tooth servo gear, the combo creates a 3:1 underdrive, slowing the final speed while increasing the torque by 3x. Weight 31g Material Aluminum Finish Clear Anodized Tooth Count 90 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0096 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 96 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 96 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 24 tooth pinion gear or servo gear. Using the pinion gear you can create 4:1 underdrive or overdrive setup depending on your application. When used with the 24 tooth servo gear, the combo creates a 4:1 underdrive, slowing the final speed while increasing the torque by 4x. Weight 36g Material Aluminum Finish Clear Anodized Tooth Count 96 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0100 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 100 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 100 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 20 tooth pinion gear or servo gear. Using the pinion gear you can create a 5:1 underdrive or overdrive setup depending on your application. When used with the 20 tooth servo gear, the combo creates a 5:1 underdrive, slowing the final speed while increasing the torque by 5x. Weight 38g Material Aluminum Finish Clear Anodized Tooth Count 100 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0105 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 105 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 105 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 15 tooth pinion gear or servo gear. Using the pinion gear you can create a 7:1 underdrive or overdrive setup depending on your application. When used with the 15 tooth servo gear, the combo creates a 7:1 underdrive, slowing the final speed while increasing the torque by 7x. Weight 42g Material Aluminum Finish Clear Anodized Tooth Count 105 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |
4302-0014-0108 | 4302 Series Aluminum, MOD 0.8, Hub Mount Gear (14mm Bore, 108 Tooth) | These straight-cut spur gears have a 14mm bore with the 16mm pattern in order to mount to hubs and other rotating components containing the 16mm pattern. The face thickness has been machined down to 3mm to recess screw heads, save weight and space, as well as provide versatility. Easily change the deck-height of the gear by 3mm by flipping the gear over!The 105 tooth, MOD 0.8 gear will mate with any MOD 0.8 gear, but when building on pattern, the most common partner for this gear is a 12 tooth servo gear. When used with the 12 tooth servo gear, the combo creates a 9:1 underdrive, slowing the final speed while increasing the torque by 9x. Weight 44g Material Aluminum Finish Clear Anodized Tooth Count 108 Gear Pitch MOD 0.8 Pressure Angle 20 Degree Quantity: pkg of 1 |