| Customization: | Available |
|---|---|
| Age: | ＞ 8 Years |
| Quantity: | Pkg of 1 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 5209-0001-0004 | Strafer Chassis Kit V4(1:1 Ratio Miter Gear,Motor Output Shaft 8mm REX) | The Strafer Chassis Kit is a rigid, low-profile chassis that includes high-torque 312RPM planetary motors, ball-bearing mecanum wheels and a configurable chassis you can tailor to your liking. Motors At a glance, you might wonder, where are the motors? Flip it over and you'll notice the nested 312RPM 7203 Series Planetary Gear Motors. Combined with the 101mm wheels, they give the chassis a theoretical speed of over 5.14 ft/sec. These motors drive all steel miter gears, heavy duty hubs, and ball-bearings ready for some low-friction strafing action! Miter Gears The miter gears, located near each of the four corners of the chassis, create a 90° drive so that the motors can nest inside the 3120 Series U-Channel. The miters have been battle-tested, even with brushless motors, and are extremely stout. Do not worry about slipping as the bores are matched to the profile of the shafts they are mounted to. Shafting All shafts (including the motor shafts) are 8mm REX for maximum strength. Wheels The thefirsttool Mecanum Wheels are 101mm in diameter, have ball-bearing supported rollers, a narrow profile and steel side plates. Each wheel is only 260g - far less than the competitors. The reduced rotating mass yields quicker acceleration with less strain on the motors. Frame The channel framework allows you to pack all these premium parts in without having to clad on to the outside like some frames require. And oh-so configurable - move the center channels, adjust your track-width and more all with the same parts we provide. SPECS Weight 4966g (10.95lbs) Motor Size RS-555 Motor Type Brushed DC Motor Nominal Voltage 12VDC Motor Output Shaft 8mm REX, 24mm Length Motor Gearbox Style Planetary Motor Gear Ratio 19.2:1 Motor No-Load Speed @ 12VDC 312 RPM Motor Connector Type : 4-Pin Female JST Encoder, Anderson Powerpoles Mecanum Wheels Diameter:101mm(4 inch) Mecanum Wheels Width:39.5mm Mecanum Wheels Number of Rollers per wheel:9 Mecanum Wheels Number of Plates per wheel:2 Mecanum Wheels Bearing Type: Rolling Bearing Mecanum Wheels Body material: steel Mecanum Wheels Roller material: Nylon+TPU Miter Gear:MOD 1.25 (8mm REX Bore, 30 Tooth) Miter Gear Ratio:1:1 size:432mm*455.25mm*101.64mm |
| 5209-0001-0003 | Strafer Chassis Kit V3(1:1 Ratio Miter Gear,Motor Output Shaft:6mm D-shaft ) | The Strafer Chassis Kit is a rigid, low-profile chassis that includes high-torque 312RPM planetary motors, ball-bearing mecanum wheels and a configurable chassis you can tailor to your liking. Motors At a glance, you might wonder, where are the motors? Flip it over and you'll notice the nested 312RPM 7202 Series Planetary Gear Motors. Combined with the 101mm wheels, they give the chassis a theoretical speed of over 5.14 ft/sec. These motors drive all steel miter gears, heavy duty hubs, and ball-bearings ready for some low-friction strafing action! Miter Gears The miter gears, located near each of the four corners of the chassis, create a 90° drive so that the motors can nest inside the 3120 Series U-Channel. The miters have been battle-tested, even with brushless motors, and are extremely stout. Don't worry about slipping as the bores are matched to the profile of the shafts they are mount to. Bearings Each 8mm REX shaft is supported in a pair of 8mm REX flanged bearings in order to maximize the torque transferred from the motors to the shafts. Wheels The ZHOUYU Mecanum Wheels are 101mm in diameter, have ball-bearing supported rollers, a narrow profile and steel side plates. Each wheel is only 260g - far less than the competitors. The reduced rotating mass yields quicker acceleration with less strain on the motors. Frame The channel framework allows you to pack all these premium parts in without having to clad on to the outside like some frames require. And oh-so configurable - move the center channels, adjust your track-width and more all with the same parts we provide. SPECS SPECS Weight 4966g (10.95lbs) Motor Size RS-555 Motor Type Brushed DC Motor Nominal Voltage 12VDC Motor Output Shaft:6mm D-shaft Motor Gearbox Style Planetary Motor Gear Ratio 19.2:1 Motor No-Load Speed @ 12VDC 312 RPM Motor Connector Type : 4-Pin Female JST Encoder, Anderson Powerpoles Mecanum Wheels Diameter:101mm(4 inch) Mecanum Wheels Width:39.5mm Mecanum Wheels Number of Rollers per wheel:9 Mecanum Wheels Number of Plates per wheel:2 Mecanum Wheels Bearing Type: Rolling Bearing Mecanum Wheels Body material: steel Mecanum Wheels Roller material: Nylon+TPU Miter Gear:MOD 1.25 (8mm REX Bore, 30 Tooth), MOD 1.25 Miter Gear (6mm D-Bore, 30 Tooth) Miter Gear Ratio:1:1 size:432mm*455.25mm*101.64mm |
| 5209-0001-0002 | Strafer Chassis KitV2(2:1 Ratio Bevel Gear Set (8mm REX Bore Pinion Gear)) | The Strafer Chassis Kit is a rigid, low-profile chassis that includes high-torque 312RPM planetary motors, ball-bearing mecanum wheels and a configurable chassis you can tailor to your liking. Motors At a glance, you might wonder, where are the motors? Flip it over and you'll notice the nested 312RPM 7203 Series Planetary Gear Motors. Combined with the 101mm wheels, they give the chassis a theoretical speed of over 5.14 ft/sec. These motors drive all steel miter gears, heavy duty hubs, and ball-bearings ready for some low-friction strafing action! Bevel Gear The Bevel Gear, located near each of the four corners of the chassis, create a 90° drive so that the motors can nest inside the 3120 Series U-Channel. The Bevel Gear have been battle-tested, even with brushless motors, and are extremely stout. Do not worry about slipping as the bores are matched to the profile of the shafts they are mounted to. Shafting All shafts (including the motor shafts) are 8mm REX for maximum strength. Wheels The ZHOUYU Mecanum Wheels are 101mm in diameter, have ball-bearing supported rollers, a narrow profile and steel side plates. Each wheel is only 260g - far less than the competitors. The reduced rotating mass yields quicker acceleration with less strain on the motors. Frame The channel framework allows you to pack all these premium parts in without having to clad on to the outside like some frames require. And oh-so configurable - move the center channels, adjust your track-width and more all with the same parts we provide. SPECS Weight 4966g (10.95lbs) Motor Size RS-555 Motor Type Brushed DC Motor Nominal Voltage 12VDC Motor Output Shaft:8mm REX, 24mm Length Motor Gearbox Style Planetary Motor Gear Ratio 19.2:1 Motor No-Load Speed @ 12VDC 312 RPM Motor Connector Type : 4-Pin Female JST Encoder, Anderson Powerpoles Mecanum Wheels Diameter:101mm(4 inch) Mecanum Wheels Width:39.5mm Mecanum Wheels Number of Rollers per wheel:9 Mecanum Wheels Number of Plates per wheel:2 Mecanum Wheels Bearing Type: Rolling Bearing Mecanum Wheels Body material: steel Mecanum Wheels Roller material: Nylon+TPU Bevel Gear: MOD 1.5, Clamping Pinion Bevel Gear (8mm REX Bore, 14 Tooth) and MOD 1.5, Hub Mount Bevel Gear (14mm Bore, 28 Tooth) Gear Ratio:2:1 size:432mm*455.25mm*101.64mm |
| 5209-0001-0001 | Strafer Chassis Kit V1(2:1 Ratio Bevel Gear Set (6mm D-Bore Pinion Gear)) | The Strafer Chassis Kit is a rigid, low-profile chassis that includes high-torque 312RPM planetary motors, ball-bearing mecanum wheels and a configurable chassis you can tailor to your liking. Motors At a glance, you might wonder, where are the motors? Flip it over and you'll notice the nested 312RPM 7202 Series Planetary Gear Motors. Combined with the 101mm wheels, they give the chassis a theoretical speed of over 5.14 ft/sec. These motors drive all steel miter gears, heavy duty hubs, and ball-bearings ready for some low-friction strafing action! Miter Gears The miter gears, located near each of the four corners of the chassis, create a 90° drive so that the motors can nest inside the 3120 Series U-Channel. The miters have been battle-tested, even with brushless motors, and are extremely stout. Don't worry about slipping as the bores are matched to the profile of the shafts they are mount to. Bearings Each 8mm REX shaft is supported in a pair of 8mm REX flanged bearings in order to maximize the torque transferred from the motors to the shafts. Wheels The ZHOUYU Mecanum Wheels are 101mm in diameter, have ball-bearing supported rollers, a narrow profile and steel side plates. Each wheel is only 260g - far less than the competitors. The reduced rotating mass yields quicker acceleration with less strain on the motors. Frame The channel framework allows you to pack all these premium parts in without having to clad on to the outside like some frames require. And oh-so configurable - move the center channels, adjust your track-width and more all with the same parts we provide. SPECS SPECS Weight 4966g (10.95lbs) Motor Size RS-555 Motor Type Brushed DC Motor Nominal Voltage 12VDC Motor Output Shaft:6mm D-shaft Motor Gearbox Style Planetary Motor Gear Ratio 19.2:1 Motor No-Load Speed @ 12VDC 312 RPM Motor Connector Type : 4-Pin Female JST Encoder, Anderson Powerpoles Mecanum Wheels Diameter:101mm(4 inch) Mecanum Wheels Width:39.5mm Mecanum Wheels Number of Rollers per wheel:9 Mecanum Wheels Number of Plates per wheel:2 Mecanum Wheels Bearing Type: Rolling Bearing Mecanum Wheels Body material: steel Mecanum Wheels Roller material: Nylon+TPU Bevel Gear: MOD 1.5, Clamping Pinion Bevel Gear (6mm D-Bore, 14 Tooth) and MOD 1.5, Hub Mount Bevel Gear (14mm Bore, 28 Tooth) Miter Gear Ratio:1:1 size:432mm*455.25mm*101.64mm |
| 5209-0002-0001 | BeeLine Chassis Kit | The Beeline Chassis Kit is a 4-motor, 6WD chassis that is ready for you to customize! Many chassis aim to be agile, but in doing so, sacrifice traction. Others have excellent traction, but suffer when it comes time to make quick maneuvers. The Beeline Chassis nails it in both departments! Given each side is equipped with two 96mm Rhino Wheels, the contact patch with the ground has been maximized so that you don't get pushed around. The omni wheels at the trailing edge of the chassis, combined with the slightly raised axle locations at each end of the chassis allow it to rotate with greatly increased speed compared to other 6-Wheel drivetrains! This style of chassis is very simple in terms of operation. The Beeline has four motors; two on the left and two on the right. The left motors will work together and the right motors will work together due to the direct link they have to one-another via the steel gears. If you're competing in FTC, you'll be using a REV hub which will require you to plug each motor into a separate channel. If you're free to choose and have motor controllers at your disposal, a 2 channel motor controller and a couple Y-harnesses will get you up and going. No need to fumble through your toolbox to find the right tools for assembly - they're included with the kit to get you up and going quickly. The easy to follow instructions will ensure that even those of you who are fresh to robotics are able to accurately assemble the BeeLine Chassis. The top of the BeeLine Chassis is primed and ready to start building upon. The channel has a multitude of holes that are easily accessible so that you can fasten intakes, shooting mechanisms, lifts and arms with ease. The channel that traverses from one side to the other can be shifted forward and aft in order to accommodate those additional mechanisms. SPECS Weight 5220g Motor Size RS-555 Motor Type Brushed DC Motor Nominal Voltage 12VDC Motor Output Shaft:6mm D-shaft Motor Gearbox Style Planetary Motor Gear Ratio 19.2:1 Motor No-Load Speed @ 12VDC 312 RPM Motor Connector Type : 4-Pin Female JST Encoder, Anderson Powerpoles Rhino Wheel Material Aluminum with Rubber Tread Rhino Wheel Durometer 70 Shore A Rhino Wheel Diameter 96mm Rhino Wheel Bore 14mm Omni Wheel Material Plastic with Rubber Rollers Omni Wheel Durometer 70 Shore A Omni Wheel Diameter 96mm Omni Wheel Bore 14mm size:432mm*448mm*96mm |
Shenzhen Zhouyu Intelligent Technology Co.,Ltd , founded in 2007 and Dongguan Zhouyu Intelligent Technology Co.,Ltd, founded in 2015, is a leading STEAM education solution provider.We are the largest manufacturer of Educational mini machines and Educational metal robot in China. the Educational metal robot can use for the FTC
Targeting the STEAM education and entertainment markets for schools, educational institutions and families, thefirsttool provides the most complete hardware, software, content solutions, and a top-notch robotics competitions, with the aim of achieving deep integration of technology and education.
I would like to inquire about potentially business partnership with your company.
Please forward this information to the appropriate personnel so that we can discuss the project.
Important !!!
-Please do not send any payment before confirming the bank information with our CEO Mr. James Long
){kind=link}