| Customization: | Available |
|---|---|
| Age: | ＞ 8 Years |
| Certification: | Assemble |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| 4805-0004-0108 | goRUN 0 | 0s are purpose-built to fit into the slot of 3109 Series goRUN or 3118 Series Open goRUN to provide an M4 threaded hole at any location you wish. The "0" shape allows you to drop them in mid-slot without having to slide them in from the end of the goRUN. The overall length allows them to stack next to one another and remain on the 8mm grid pattern. Weight 1.3g Each Weight: 33 grams per pkg. size:10.8mm*7.8mm*2.87mm Threaded:M4 Material Steel Quantity: pkg of 25 |
| 4805-0004-0038 | 5 Hole goRUN Nut | goRUN nuts slide into the goRUN slot and provide threaded holes to fasten components to.5 Hole goRUN nuts provide additional surface contact between the goRUN and the nut for heavy duty applications. Using a nut with multiple holes makes alignment very simple as there's no chance of it sliding down the slot as long as one fastener is threaded into the nut. Weight 6.7g Each Weight: 20 grams per pkg. size:10.6mm*38mm*2.9mm Threaded:M4 Material Steel Quantity: pkg of 4 |
| 4803-0007-0007 | 4803 Series Stainless Steel Threaded Plate (7-7) | The smallest of the stainless steel threaded plates; the M4 square nut has large flat sides making it easy to grip them with a wrench or pair of pliers. In certain applications the larger clearance diameter will cause these nuts to contact an adjacent wall so that no tool is needed to hold it in place while tightening and loosening. Weight 0.91g Each size:7mm*7mm*3mm Material Stainless Steel Quantity: pkg of 24 |
| 4803-0023-0023 | 4803 Series Stainless Steel Threaded Plate (23-23) | This screw plate aligns with the 16mm pattern. The four threaded holes allow you to tighten screws down without having to hold nuts from turning during assembly. The surface area disperses potential forces on the structure the plate is used on, therefore increasing the strength. Weight 7.9g Each size:23mm*23mm*3mm Threaded:M4 Material Stainless Steel Quantity: pkg of 1 |
| 4803-0039-0007 | 4803 Series Stainless Steel Threaded Plate (39-7) | These screw plates are an excellent general purpose screw plate to have on-hand when building. The five holes all on grid give you multiple fastening options, while dispersing the loads exerted on the structure they are holding together. Weight 5.3g Each Weight: 16 grams per pkg. size:39mm*7mm*3mm Threaded:M4 Material Stainless Steel Quantity: pkg of 1 |
| 4803-0039-0039 | 4803 Series Stainless Steel Threaded Plate (39-39) | The large square shape of this screw plate stretches out to the 32mm pattern maximizing the amount of area between attachment points. Weight 7.9g Each size:39mm*39mm*3mm Threaded:M4 Material Stainless Steel Quantity: pkg of 1 |
| 4803-0039-0022 | 4803 Series Stainless Steel Threaded Plate (39-22) | While it may be as universal as the other screw plates, the design allows you to fasten pattern-based structure (channel, low channel, pattern brackets) end-to-end. Weight 11g Each Weight: 16 grams per pkg. size:39mm*22mm*3mm Threaded:M4 Material Stainless Steel Quantity: pkg of 1 |
| 4902-0005-0038 | 4902 Series Hinge (5 Hole, 38mm Length) | Hinges are a clean and simple way to create motion with a single degree of freedom.This hinge is capable of 270 degrees of rotation and has threaded holes spaced 8mm apart. It's constructed of aluminum with a stainless steel pin that's been pressed in. Weight 9.2g Each Weight: 12 grams per pkg. Threaded:M4 Material Stainless Steel Quantity: pkg of 1 |
| 3202-0001-0002 | 3202 Series Angle Pattern Mount (1-2) | This 3202 Series Angle Pattern Mount (1-2) has both counterbored thru-holes and thru-holes on the 16mm pattern. Use it to hold a sensor or motor off a surface or clad a 90 degree joint to add structural support,create tilt assemblies . Weight 71g Each Material Aluminum Finish Clear Anodized Quantity: pkg of 1 |
Shenzhen Zhouyu Intelligent Technology Co.,Ltd , founded in 2007 and Dongguan Zhouyu Intelligent Technology Co.,Ltd, founded in 2015, is a leading STEAM education solution provider.We are the largest manufacturer of Educational mini machines and Educational metal robot in China. the Educational metal robot can use for the FTC
Targeting the STEAM education and entertainment markets for schools, educational institutions and families, thefirsttool provides the most complete hardware, software, content solutions, and a top-notch robotics competitions, with the aim of achieving deep integration of technology and education.
I would like to inquire about potentially business partnership with your company.
Please forward this information to the appropriate personnel so that we can discuss the project.
Important !!!
-Please do not send any payment before confirming the bank information with our CEO Mr. James Long
){kind=link}